If the photograph is clicked, it grows.

Input Frequency: 0.03Hz-120kHz Resolution : 8.3ns (120MHz equivalent) Inut signal:Logic / zero cross (AC) Trigger level 0.0-9.9V (accuracy 0.1V max.) Input sensitivity Min 0.2V p-p Input resistance 10kohm Coupling DC / AC Low-pass filter None/15kHz (-3dB, 6dB / oct)/ 1.5kHz (-3dB, 6dB / oct) Input connector BNC connector / screwless terminal block (loop through) Line driver input Input sensitivity Min. 1V (differential voltage) Input withstand voltage +-25V (for PULSE GND) Recommended line driver AM26LS31 or equivalent Input resistance 340ohm Input connector Screwless terminal block Input pulse width MIn. 2micros (both H level and L level Trigger direction Rise / Fall (selectable) Input indicator TRIG'D LED : Flash during pulse input (continuously lit for high-speed pulse) Power supply for sensor +5V : Max. 150mA +12V : Max 120mA Display Display 162 character dot matrix LCD (LED back light illumination) Frequency display digits 6 digits Frequency display accuracy +-100ppm 【Processing】 Measurement mode F/V (speed output) / deltaF (deviation output) Operation time Max. 3us Input pulse dividing 1-64 (by software) Output moving average 1-32 (average of input pulse number) Set value storage Non-volatile memory (EEPROM) 【Analog Output】 Output voltage range 0-10V / 0-5V / 1-5V deltaF (deviation output) mode Center freequency setting range 1Hz-100kHz Output voltage range +-10V / +-5V deltaF sensibility range +-0.5% / +-1% / +-2% / +-5% /+-10% / +-20% Output resolution 16bit (about +-10.8V) Output response time Max. 5us (90% response) Output accuracy Max. +-0.1% of full scale Load resistance Min. 4.7kohm AC 85V-250V (50Hz / 60Hz) Max. 30VA 57 (W) 218 (H) 218(D) mm Weight 1.8kg