NF FRA5095 0.1mHz-2.2MHz Frequency Response Analyzer with Impedance kit SOLD OUT sold
net077
Output waveform : Sine,Square,Triangle Frequency range Sine wave: 0.1mHz to 2.2MHz Square, Triangle wave: 0.1mHz to 100kHz Setting Resolution: 0.1mHz Amplitude AC: 0V to 10.V peak (No load) DC: -10.0V to 10.0V Frequency sweep Logarithmic sweep: 3 to 20,000 steps/sweep or to 20,000 steps/decade Linear sweep: 3 to 20,000 steps/sweep or to 0.1mHz to 2.2MHz/steps Automatic high density sweep is available Isolation voltage 250Vrms (input vs. chassis, vs. analysis section)
Analysis Section Number of input channels 2 channels (CH-1, CH-2) Isolation voltage 250Vms (input vs. chassis, vs. oscillator output, and to analysis part input) Amplitude range Auto-ranging, Max 250Vrms Max. input voltage AC + DC 350V peak DC bias elimination Automatically eliminate up to value without error Dynamic range no less than 140dB (10Hz to 1MHz) Delay function 0 to 9,999 sec., 0 to 9,999 cycle Integration function 0 to 9,999., 1 to 9,999 cycle Available Automatic integration Amplitude compression function Automatically control the amplitude of oscillator for keeping the input level of analysis constant Other functions Equalize function, Harmonic analysis function Analysis mode Ratio: CH1/CH2, CH2/CH1 Level: CH1, CH2 Arithmetic function Arithmetic operation, Sencod-differentiation, Integration, Double integration, Measurement error CH1/CH2 mode 20kHz or less 500kHz or less 2.2MHz or less 2.2MHz more* a, b, R +/-0.5% +/-1% +/-10% +/-25% logR +/-0.05dB +/-0.1dB +/-1dB +/-2dB Phase +/-0.3 deg +/-0.5 deg +/-2 deg +/-5 deg
External memory Media Floppy disk (3.5inch 2HD 1.44MB) Disk format Compatible with Windows Memory contents Setting conditions, Measurement data Others Thermal printer LCD screen hardcopy GPIB Setting conditions, Inquiry of conditions & data, Instructions Plotter output Hardcopy on LCD screen DC source output connector for 5055, +/-24V, Max.100mA Power requirement AC100V/120V/230V +/-10% 48 to 62Hz Max. 80VA ,434 (W) *177 (H) *500 (D),15kg Impedance display function (option) Model no. PA-001-0341 for FRA5095
)
)
)
)
)