Tektronix DPO7354/ET3 DC-3.5GHz 4ch 40Gs/s Oscilloscope SOLD OUT SOLD
os2289
Input Channel:4ch, Bandwidth:3.5GHz, Rise Time:115ps, Hardware Analysis:2.5Ghz, DC Gain Accuracy:+-1% with offset/posiyion set to 0, Bandwidth Limits: Input Impedance:1Mohm +-1% with 13pF +-2pF 50ohm +-1%, Input Sensitivity; 1Mohm:1mV/div to 10V/div, 50ohm:1mV/div to 1V/div, Vertical Resolution:8bit(>11bit with Hi Res), Max Input Voltage; 1Mohm:+-150V CAT I,derate at 20dB/decade to 9Vrms above 200kHz, 50ohm:5Vrms with peak less than +-24V, Position Range:+-5 divisions, Offset Range; 1m/div to 50mV/div:+-1V, 50.5mV/div to 99.5mV/div:+-(1.5V-10divisions), 100mV/div to 500mV/div:+-(15V-10divisions), 505mV/div to 995mV/div:+-(15V-10divisions), 1V/div to 5V/div:+-100V, 5.05V/div to 10V/div:+-(150V-10divisions), Offset Accuracy; 1m/div to 9.95mV/div: +-0.2%(offset value-position)+-0.1div+-1.5mV, 10mV/div to 99.5mV/div: +-0.35%(offset value-position)+-0.1div+-1.5mV, 100mV/div to 1V/div: +-0.35%(offset value-position)+-0.1div+-15mV, 1.01V/div to 10V/div: +-0.25%(offset value-position)+-0.1div+-150mV, TimeBaseSystem; Time Base Range:25ps/div to 1000s/div,Res 250fs, Time Base Delay Range:5ns to 250s, Delta Time Measurement Accuracy:((0.06/sample rate)+(2.5ppm*reading))RMS, Trigger Jitter(RMS):1.5psrms(typ) with enhanced trigger OFF),<100fsrms with enhanced trigging ON, Time Base Accuracy:+-2.5ppm + Aging<1ppm per Year, Aquision System; Real-time Sample rate:40GS/s(1ch),20GS/s(2ch),10GS/s(3-4ch),Equivalent Time Sample Rate(Max):4TS/s
Sold Thank you very much Option:ET3 (Ethernet Compliance Software)
)
)
)
)
)
)
)
)
)