Anritsu MS2725C 9 kHz-32 GHz High Performance Handheld Spectrum Analyzer
SOLD OUT sold
spe361







Frequency
Frequency Range:9 kHz to 32 GHz (tunable to 0 Hz), Preamp 100 kHz to 32 GHz
Tuning Resolution:1Hz
Frequency Reference
Aging: ±1.0 ppm/10 years
Accuracy: ±0.3 ppm (25 °C ±25 °C) + aging
Auto-sensing External Frequency Reference
1, 1.2288, 1.544, 2.048, 2.4576, 4.8, 4.9152, 5, 9.8304, 10, 13, 19.6608 MHz
Frequency Span:10 Hz to 32 GHz including zero span
Sweep Time:10 μs to 600 seconds in zero span
Sweep Time Accuracy:±2 % in zero span

Bandwidth (Performance Sweep Mode)
Resolution Bandwidth:(RBW) 1 Hz to 10 MHz in 1–3 sequence ±10 % (–3 dB bandwidth)
Video Bandwidth (VBW):1 Hz to 10 MHz in 1–3 sequence (–3 dB bandwidth)
RBW with Quasi-Peak Detection:200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth)
VBW with Quasi-Peak Detection:Auto VBW is On, RBW/VBW = 1

Amplitude Ranges
Dynamic Range:> 104 dB @ 2.4 GHz, 2/3 (TOI-DANL) in 1 Hz RBW
Measurement Range:DANL to +30 dBm
Display Range:1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range:–150 dBm to +30 dBm
Attenuator Resolution:0 to 65 dB, 5 dB steps
Amplitude Units:Log Scale Modes: dBm, dBV, dBmv, dBμV
Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW
Maximum Continuous Input:
+30 dBm Peak, ±50 VDC (≥ 10 dB Attn)
+23 dBm Peak, ±50 VDC (< 10 dB Attn)
+13 dBm Peak, ±50 VDC (Preamp On)

Third-Order Intercept (TOI) (–20 dBm tones 100 kHz apart, –20 dBm Ref level, 0 dB input attenuation, Preamp Off)
2.4 GHz :+15 dBm
50 MHz to 20 GHz:+20 dBm typical
20 GHz to 32 GHz:+15 dBm typical

P1dB
< 4 GHz:+5 dBm typical
4 GHz to 20 GHz:+12 dBm typical
20 GHz to 32 GHz:+7 dBm typical

Second Harmonic Distortion
50 MHz:–54 dBc
< 4 GHz:–60 dBc typical
> 4 GHz:–75 dBc typical

VSWR (> 10 dB input attenuation)
< 20 GHz 1:5:1 typical
> 20 GHz to 32 GHz 2:0:1 typical
Power Code