HP 70843B 100M-12Gbps bit error rate tester
JPY550,000　1 stock		 com316








OPT:UHF,UHJ
12Gb/s Error Performance Analyzer System
Bit Rate: 100 Mb/s−12 Gb/s
Rise Time (10% to 90%): less than 30 ps
Patterns: 2^7-1, 2^10-1, 2^15-1, 2^23-1, 2^31 -1;
zero substitution; variable mark density;
variable length user pattern from 1 bit to 8 Mbits
Data & Data Outputs: ECl or variable 0.5 V to 2 V peak-to-peak amplitude into 50 ohms
Sub-Rate Outputs: 4 data plus clock (1/4 of main data rate) 0.5 V to 1 V peak-to-peak amplitude

Jitter: < 20 ps peak-to-peak; <15 ps peak-to-peak at 10 Gb/s

Clock/Data Delay: 1 ns; resolution 1 ps (100-500 Mb/s) 1 clock period; resolution 1 ps (>500 Mb/s)
Data Input Sensitivity: < 50 mV peak-to-peak (typical) at 10 Gb/s
Decision Threshold Range: +1Vto -3V;resolution 1 mV
Termination Voltage: Selectable 0 V or -2 V nominal
Errors Detected: Errored ones and zeros and all logic errors
Measurements: Error count, ratio; errored seconds, deciseconds, centiseconds, milliseconds; and G.821 analysis

OPT
UHF:Error Performance Analyzer
UHJ:Error Location Analysis