Audio Precision SYS-2322 10Hz-500KHz Audio Analyzer
JPY400,000 1stock
log494



SYS2322 control by Windows7

Analog LF THD measuremnt

Analog IN Gen monitor

Analog IN BNC Unbal

Digital IN BNC unbal

Digital IN XLR bal FFT

Digital IN XLR bal FFT

Option

Channel B frequency counter Error

System2 Dual Domain
(Analog ,Digital interface)

Low Distortion Sine Wave
10Hz - 204kHz 10mV - 26.66Vrms Flatness ±0.008 dB
Residual Distortion typically <0.0001% [-120 dBc]
Residual THD+N 0.0004% + 1 mV 22 kHzBW [-108 dB]
Test Signals
CCIF,DFD,DIM,Sine Burst Square Wave,Noise Signals
D/A Converter 18-bit dual channel delta-sigma
28.8ks/sec - 52.8ks/sec
Source Impedances: Balanced /CMTST 40/150/600ohm
Unbalanced 20/600ohms

Analog Analyzer
Input Ranges 40mV-160V in 6.02 dBsteps Input Impedance 100Kohm
Terminations Selectable 600/300ohms 1W
Level Meter 0.5% Flatness 0.008dB
Frequency Meter 10-500KHz 6digits
Phase Measurement 0.1deg minimum 5mV
Wideband Amplitude/Noise Function 1uV-160Vrms
Bandwidth Limiting Filters LF -3 dB <10 Hz,22 Hz per CCIR Rec 468,100 Hz ±5% (3-pole),400 Hz ±5% (3-pole)
HF -3 dB 22 kHz per CCIR Rec 468,30 kHz ±5% (3-pole),80 kHz ±5% (3-pole),>500 kHz

DIGITAL OUTPUT
Output Formats AES/EBU (per AES3-1992) SPDIF-EIAJ
Optical (ToslinkÒ) General purpose serial General purpose parallel
Serial interface to chip level via optional SIA-2322 accessory
Audio Monitor Speaker
Power Requirements 100/120/230/240V,50–60 Hz, 240VA
41.9 x 15.2 x 34.5 cm 15.9Kg

Option
Filter AWT
Power cord,APIB-USB,CD-R(Manual,Software)