Cable and Antenna Analyzer Mode • Frequency range:400MHz-4GHz • Measurements: RL, VSWR, Cable Loss, DTF, Phase, Gain • 2-port Gain Measurement Uncertainty: < 0.45 dB • 2-port Dynamic Range: > 80 dB • RF Immunity: +17 dBm on-channel, +10 dBm on-frequency • Calibration: OSL and FlexCal™ • Bias Tee: 32 V internal
Spectrum and Interference Analyzer Mode • Frequency range:150kHz-7.1GHz • Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I • Interference Analyzer: Spectrogram, Signal Strength, RSSI, Signal ID • Dynamic Range: > 95 dB in 1 Hz RBW • DANL: –163 dBm in 1 Hz RBW • Phase Noise: –100 dBc/Hz @ 10 kHz offset • Frequency Accuracy: ± 25 ppb with GPS On
Vector Signal Generator Output power:-124dBm - 0 dB Frequency range:400MHz-6GHz
Power Meter Mode Frequency Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Full Band Amplitude Maximum, Minimum, Offset, Relative On/Off, Units, Auto Scale Average Acquisition Fast/Med/Slow, # of Running Averages Limits Limit On/Off, Limit Upper/Lower Frequency Range 10 MHz to 7.1 GHz Span 1 kHz to 100 MHz Display Range –140 dBm to +30 dBm, ≤ 40 dB span Measurement Range –120 dBm to +30 dBm Offset Range 0 to +100 dB VSWR 1.5:1 typical Maximum Power +30 dBm without attenuator Accuracy Same as Spectrum Analyzer Application Options Impedance (50 Ω, 75 Ω, Other)
Option 0019 High Accuracy Power Meter 0023 Vector Signal Generator 0031 GPS-Assisted Frequency Accuracy
Power Code,Cigar socket charger,Japanese manual*1,English Manual*1,CAT5e Lan Cable*2,CDRom*2,USB TO MicroUSB Convert Cable*1,Belt*1
)
)
)
)
)
)
)
)
)
)
)
)